Vortex Uninstall All Mods

• Nexus Vortex Uninstall All Mods

From Beautifying to Range Boosting, These Are The Mods You Can Do1. Drop in a Stronger Springthis alone adds the most range2.

Note 1: As with all Vortex products we offer a 12 month warranty against manufacturing defects. Note 2: The ECU does not come standard with a handlebar switch as this is an optional extra. There is no need for a switch eliminator when not running the handlebar switch as with our other CDI products. Key Features.

Remove the Air Restrictorsevery blaster has them3. Use Better Dartsadds 10-15 feet range4. Build a Better Barreluse PVC, PETG, or Brass5. Paint Jobmake it look awesome6. Higher Voltage(if your blaster uses batteries) Start Here: The Best & Most Popular Range Boosting ModsReplacing the stock spring and removing the air restrictor are popular modifications because they have the most impact on range, and are fairly easy to do with the introduction of Mod Kits. Since everything you need is available in these convenient kits, the only step for you to do is installation. I also have a review of.Why Should You Mod Your Blaster?Modding accomplishes two major things.

For one thing, your range will increase dramatically. Think about the Nerf gun you have. How far does it shoot?

Your answer will probably be between 15 and 35 feet Not bad, but imagine that once you have all the power you need in that gun, the darts flying double or even triple that length? It’s not unheard of. Some people have modded guns to shoot well over 100 feet.The second reason relates to the automatic guns. When you buy an automatic rifle, it can clear a set of 25 rounds in about 7 or 8 seconds. But what would it sound like to have the guns empty the 25 rounds in just 3 seconds?

More than 8 rounds per second shooting at a victim. That sounds cool, right?Some people even take their creations and sell them for a profit on eBay or other auction sites, so if you’re looking to make a few bucks on the side, then it can be accomplished also doing this. How Do I Mod a Nerf Gun?It’s actually easier than most think. There are three basic things you can do with almost any gun on the market sold by Nerf. Make the spring stronger, Removing air restrictors or modding the barrel, and replacing it with a brass tube.

All three of these are done with the intent of putting more power in your shot so when you fire a dart, it will go further. You also can create your own darts, called “Stefans” to use. PART 1: Stronger SpringFor this, you will need to unscrew the blaster and be sure not to lose them. In fact, just put them in a yogurt container for safe keeping (trust me they are very easy to lose). Once you unscrew them all the shell, separate the shell halves.

The internal nuts and bolts are there. You also will find springs inside the pulling system. In the CS-6 for example, it is in the middle.

You can buy several 20 lb. Springs that will dramatically increase the power of your shot. You may need to reinforce the gun with PVC pipe afterwards because the kick will make the gun that much more powerful and you don’t want the gun to fall apart. Then you just replace the screws and you’re all set.

Finding the spring on your gun is not that difficult. PART 2: Remove Air RestrictorsAir Restrictors are parts of plastic that take roughly half of your energy that you put into the shot and just throw it away. Take a drill, a long bit and a Phillips Head screwdriver. Unscrew the screws on the gun again remembering where they all go. Near the middle of the gun once you remove the trigger on the CS-6 is a blocked space inside of a tube that looks like a turret. The opposite side will have a needle pointing about 2/3 of the way outside the tube. Drill out the needle part and you will have no restrictions on the air, allowing shots further than you ever thought possible.

Remember to reassemble the gun.Every blaster is different so the air restrictor will sometimes be in a different location. In most cases it is easily identified.

Here’s a picture to show you the before and after removal of the air restrictor in the Zombie Strike Hammershot. PART 4: Creating Stefans (Homemade Darts)A nerf dart is usually made out of. Pick up a 20 foot bag at your local hardware store and guess what? You have 20 feet of “darts”, except you need to put a hole in them. So cut proper dart length for each one (you’ll get about 75 in each bag). Cut and straighten them by using a hair dryer and a pillowcase.

Nexus Vortex Uninstall All Mods

Let the hair dryer run for 1-2 minutes and shake the pillowcase, and let them cool.Next, using a glue gun (don’t add any glue yet) carve holes in the top at the center, put a BB in and then glue over the BB to fill it up. In about 30 minutes, you’ll have 75 of these well made. PART 6 (if applicable): Higher VoltageThis is another mod but it isn’t as simple as the above one (not even close) that being said it takes a bit of experience but you can do it in an afternoon if you have the resources available. You can take a rapid fire action gun, one that has a chain style loading belt and increase the voltage on the gun by adding larger battery packs (the kind in remote control cars and boats). This requires some wiring experience but once applied it can increase your rounds per minute to up to 500. Be careful though, some people have melted their guns doing this, no kidding!